發布時間:2020-10-19

TK13系列數控立臥回轉工作臺
>> 產品介紹:
詳細參數
規格參數:MAIN SPECIFICATIONS
No. 項目ITEMS TK13500 TK13630 TK13800 TK131000 TK131200A
1 工作臺面直徑 Trunlable diameter(mm) Φ500 Φ630 Φ800 Φ1000 Φ1200
2 工作臺垂直時中心高 Center height(mm) 310 400 465 580 720
3 工作臺總厚度Total thickness(mm) 300 350 390 530 795
4 中心定位孔直徑Center bore diameter (mm) Φ60H6x25 Φ70H6x30 Φ135H6x35 Φ165H6x50 Φ180H7x100
5 定位鍵寬度 Locating key size (mm) 22 22 22 22 22
6 工作臺T型槽寬度T-slot size(mm) 6-18 6-18 8-18 12-22 4-28
7 蝸輪副傳動比worm gear ratio 1:160 1:120 1:120 1:132 1:120
8 總傳動比Total reduction ratio 1:180 1:180 1:360 1:360 1:360
9 工作臺最高轉速Max.speed(r/min) 8.3 8.3 5.6 4.2 4.2
10 設定最小分度單位Table graduation angle per pulse 0.001° 0.001° 0.001° 0.001° 0.001°
11 伺服電機(用戶自備)帶2000脈沖編碼器 Servo motor (optional) 功率(kw)output ≥1.4 ≥1.4 ≥3.8 ≥3.8 ≥5
扭矩Nm ≥12 ≥15 ≥22 ≥25 ≥35
12 分度精度Dividing accuracy 20″ 20″ 15″ 15″ 15″
13 重復精度Repeatabilliy accuracy 3″ 3″ 3″ 3″ 3″
14 剎緊力矩Clamp torque (Nm) 油壓剎緊Oil 15X10(5)Pa 750 1500 6000 油壓Oil35X10(5)Pa為7800 油壓Oil35X10(5)Pa為10000
氣壓剎緊Air6X10(5)Pa 250 500 2000
相關資訊
- 2021-10-14數控轉臺的選用標準有哪些
- 2021-09-28數控轉臺發貨啦發貨啦,快來看看吧?
- 2021-09-14在數控轉臺的使用過程中需要注意哪些事項
- 2021-08-28介紹一下數控轉臺的漏電原因。
- 2021-08-21數控轉臺的配置與使用建議
- 2021-08-14數控轉臺對數控機床的重要性表現在哪方面?