發布時間:2020-10-19

FK15系列數控分度頭
>> 產品介紹:
詳細參數
NO. 項目ITEMS RC-5CL FK15110 FK15110A FK15125A FK15125 FK15140 FK15145 FK15150B
1 中心高center height mm 110 110 110 125 125 140 154 150
2 圓工作臺面直徑Diameter of the table surface Φ125 Φ160 Φ160
3 圓工作臺T型槽寬度T-slot width on table surface 10H12 10H10 10H10
4 蝸桿副傳動比Worm gear ratio 1:90 1:90 1:90 1:60
5 圓工作臺定位孔直徑Diameter of center bushing 16H7 20H7 20H7
6 分度頭找定位孔直徑Diameter of indexer tram bushing / Φ10H8 / / Φ10H8 Φ10H8 / Φ10H8
7 定位鍵寬度width of locating key 12 12 18 18
8 主軸端部鏈接尺寸Connecting dimensions of spindle nose 5C孔2.187”X10扣外螺紋 Φ52H6 A16 A16
9 主軸孔可配彈簧夾頭Collet 5C 無 3J、5C(帶有3J變5C過渡套) 無 3J、5C(帶有3J變5C過渡套)
10 可配電機Motor ≥2.94
11 氣源壓力Air pressure 4~6x{102x103}Pa 4~6x{102x103}Pa 4~6x{102x103}Pa 4.5~5x{102x103}Pa
12 重復精度Repeatability 7.5
13 分度精度Dividing accuracy 45”
14 切向最大力矩Max.tangent torque 90 90 120 120
15 分度頭最高轉速Max.speed 11.1 11.1 11.1 33.3
16 凈重Net weight 35 50 50 80 80 90 90
17 毛重Gross weight 42 58 58 88 88 100 100
18 承載能力Load capacity kg 水平Horizontal 100 100 100 150 150
垂直Vertical 50 50 50 80 80
相關資訊
- 2021-10-14數控轉臺的選用標準有哪些
- 2021-09-28數控轉臺發貨啦發貨啦,快來看看吧?
- 2021-09-14在數控轉臺的使用過程中需要注意哪些事項
- 2021-08-28介紹一下數控轉臺的漏電原因。
- 2021-08-21數控轉臺的配置與使用建議
- 2021-08-14數控轉臺對數控機床的重要性表現在哪方面?